Tus neeg siv phau ntawv

Wire Diagram of Receiver
Installation Diagram of receiver
White: Neutral Wire for Fan
Blue: Live Wire for Lamp control
Black: Live Wire for Fan
Power Parameters Table
Fan
2A for Fan
110-130V
On/Off 500W
* RF wireless digital transmission technology is adopted to realize the one-to-one control
proviing a rate of coincident code less than 1/50000. Same code number is attached to the back
of the emitter and the receiver, it is required to return a pair of the same code number of emitter
/ receiver to the manufacturer for repair service in case of any damager.
* In a sufficient space, you can use the receiver at any angle, no worry about the direction.
If both the fan and the lamp are equiped with a switch, please switch the fan to the highest
speed and turn on the lamp before use of the remote control