Installation Instructions

7 86
22iF-012E R2
Manufacturer: Zhongshan Camry Electronic Co., Ltd.
Address: Baishawan Industrial Park, Qiwan Road(N),
East District, Zhongshan City, Guangdong Province
Postal Code: 528403
Tel: [phone]
Fax: [phone]
Email: [e-mail]
The product picture is indicative only.
Appearance specifications please in kind prevail.
FAQ
The software can't obtain weighing results from
Smart scale.
● Please confirm the connection sign on the App
interface to know the connection status.
● Confirm the Bluetooth is on in your device and
the Smart scale is on within the valid range of
signal coverage.
● Check whether the battery power is running low.
● Relaunch the application.
● Turn off the Bluetooth and on again, then bridge
the Bluetooth connection between scale and
smart phone again.
Fail to connect to your device
● Please make sure only one device is setting up
connection with the Smart scale.
● Please make sure your device is equipped with
Bluetooth 4.0 or above.
LCD has no response
● If it’s powered by AAA batteries, please first check
the batteries and replace them if necessary.
If the scale is with built-in rechargeable battery,
please use the USB cable to recharge the scale if
necessary.
● Repairs may only be carried out by our autherized
customer service or dealers.
weight data to your smart phone via Bluetooth
technology, as well as make graph of your
weight results, from which you are able to keep
track of the trend anytime. Download the App
on your phone to use Smart scale, you will
start your first step of weight control.
ADVICE FOR USE & CARE
1.To ensure the accuracy of the data, it is
recommended that each measurement be
carried out at the same time of day. Don't
use in strong electro-magnetic condition
and field with intense shake .
2.Stand on the scale steadily and touch the
electrodes on the platform with your bare
feet. Tip over will lead to a fall when you
step on the edge of one side of the scale.
Keep standing firmly on scale when in use.
3.Do not use the scale in humid, overheat
environment.(Temperature range from 5℃
to 35℃)
4.When the battery runs out, please remove
the battery in time to prevent leakage of the
battery lead scale body corrosion;
5.If the product cannot work properly, then
- For the scale using 1.5V AAA batteries,
please check whether battery is installed,
or battery power is low.Inset or replace new
batteries.
- For the scale with built-in rechargeable battery,
please press the restart button to reset the scale
with the aid of a sharp object.
6.Do not drop, shock or strike the scale as it is
a precise instrument.
7.Keep the scale clean. Do not use acid cleaning
agent.
Instructions for Use
iF-12 SERIES
ISO 9001 CERTIFIED BY SGS
Smart Body Fat Scale
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.