User's Manual

Inserting the Micro SD Card into the speaker and power off. Please use the USB cable
included to connect the speaker to the computer.The speaker will enter the card reader
mode,then the Micro SD card can be read and written on the computer directly.
Note:The first time using this function, computer will install the driver automatically.
7. Intelligent power saving function
The speaker will be automatically powered off in below cases:
(1) Under Bluetooth mode, the speaker is waiting to pair for more than 20 minutes
(2) Under Memory card mode / FM mode / Aux In mode, if press the button to
pause/mute for more than 20minutes.
Note:Please long press button again to power on the speaker
8. Charging
When speaker with low battery capacity, the speaker will prompt “battery low”, Please
charge the battery via a USB adaptor immediately. During charging, the power indicator
will keep flashing in white. When fully charged, the power indicator will in solid white.
Note:
Please use the good quality adaptor to charge the speaker.
We suggest use the adaptor specification at 5V/1A
When speaker with low battery capacity, please charge the speaker immediately
The speaker can be charged by different charging current, if using the computer to charge
the speaker, as the current only at 700 mA, the charging time will be very long.
Troubleshooting
1. What should I do if the speaker can not pair with the Bluetooth device and play
music accordingly?
(1) Please check the specification/ the manual of the Bluetooth device (your mobile or
computer), and check if the device can support the A2DP stereo audio transmission. If
yes, please turn on the A2DP stereo mode.
(2) Ensure the speaker at the Bluetooth status, if there are many Bluetooth devices
around you, it may be hard to scan, then please turn off other devices.
2. What should I do if the Micro SD card /USB flash disk can not work?
(1) Ensure that the Micro SD card/USB flash disk is in good condition. Also check that
the audio files are the correct formats - MP3/WMA/WAV/APE/FLAC.
(2) Besides the above case, the problem maybe the compatibility of the Micro SD
card/USB flash disk.
We recommend you formatting the Micro SD Card to FAT32 file formats.