Specifications

15xx-A1 Family Router Users Guide 66
2. Enter a unique name for the rule in the Policy Name text box.
3. Select the interface to associate with the rule from the Use Interface drop down
4. Select the appropriate protocol and define other parameters for the routing rule:
 Source and/or Destination address and/or Subnet Mask
 UDP/TCP Source or Destination port.
 Gateway address or Interface (These can be Active PVCs or Port Mapping Groups)
5. Click Save/Apply.
RIP
To enable RIP on an interface, open the Routing – RIP Configuration page.
Enter the RIP configuration and then click Apply/Save.