Specifications

15xx-A1 Family Router Users Guide 45
LAN Local Area Network (LAN) Setup
You can configure the DSL Router IP address and Subnet Mask for the LAN interface to
correspond to your LAN‘s IP Subnet. .Changing the IP address here may cause your browser to
be disconnected from the modem. You will need to set your PC to the same subnet as the
modem‘s IP address to access the router again.
IGMP snooping
If you want the DHCP server to automatically assign IP addresses, then enable the DHCP server
and enter the range of IP addresses that the DHCP server can assign to your computers. Disable
the DHCP server if you would like to manually assign IP addresses.
Default–the default LAN configuration is based on your router‘s IP address.
Static IP Lease list – you can configure the DHCP server to set aside up to 32 static IP
addresses based on the MAC addresses of the device connected to the router by clicking on the
add entries button.
To remove the Static IP address, click the check box next to the MAC address and click Remove
Entries.
You may be able to assign a second IP address for the modem. To do that, click the check box
Configure the second IP Address and enter the IP address and subnet mask.
Click the Apply/Save button to save the LAN configuration data.