Specifications

15xx-A1 Family Router Users Guide 44
After the settings are saved, the below screen will follow displaying the WAN settings that
you made with the option to Add or Remove any of the connections that you have made.
Remove a Connection
If you want to delete a connection from the listed WAN setup, click the Remove check box next to
the connection, then click Remove.
Edit a Connection
If you want to modify a connection from the listed WAN setup, click the Edit button next to the
connection.
NOTE: Some connection settings cannot be edited after they have been created. You will need to
delete and re-add the connection to change some settings.
Ethernet Mode
Ethernet mode allows you to select the speed of your Ethernet connection. Modes include—auto,
100 full, 100 half, 10 full and 10 half. If you select auto then the router will use the common
mode that all the connected interfaces can operate at.