Instruction manual

5
Configure the T1 Ports
Configuration Switches for both T1 Port 1 and T1 Port 2 are numbered from left to right,
1–8.
Table 1. TNE1520-P Provider Configuration Switches
Switch Port 1 Port 2
1 Speed Speed
2
3 Frame Type NOT USED: Port 2 frame type is
determined by the Port 1 frame type
4 Line Code NOT USED: Port 2 line code is
determined by the Port 1 line code
5 Line Attenuation NOT USED: Port 2 line attenuation is
determined by the Port 1 line
attenuation
6
7 Timing NOT USED: Port 2 timing is
determined by the Port 1 timing
8 NOT USED NOT USED
Table 2. TNE1520-S Subscriber Configuration Switches
Switch Port 1 Port 2
1 NOT USED: The TNE1520-S
determines speed via
communication with its partner T1
provider unit
NOT USED: The TNE1520-S
determines speed via
communication with its partner T1
provider unit
2
3 Frame Type NOT USED: Port 2 frame type is
determined by the Port 1 frame type
configuration
4 Line Code NOT USED: Port 2 line code is
determined by the Port 1 line code
configuration
5 Line Attenuation NOT USED: Port 2 line attenuation is
determined by the Port 1 line
attenuation configuration
6
7 NOT USED NOT USED
8 NOT USED NOT USED