Specifications

General Features 4-25
IMACS-200 General Features Software Download Procedures
Default value is 20.
9. Enter the desired number of timeout retries. Press Enter.
Default value is 4. The Flash Screen appears with the software removed from the selected
bin.
Figure 4-12.Flash Screen with Software Removed
10. Enter the IP address of the TFTP server. Press Enter.
11. Enter the firmware filename. Press Enter.
Filenames contain “SYS” and the version number followed by an underscore, the desired
block number and “.bin”. For example, using filename SYS541_2.bin downloads the
SYS software release 1.0.0.1 to SYS block 2.
The download software appears in the Flash screen.
Figure 4-13.Flash Screen with Downloaded Software