Specifications

4-12 General Features
Model No.
Running Head
User Screens and Settings IMACS-200 General Features
4.3.6 Network Statistics Screens
The Network Statistics Screens provide maintenance and diagnostic information for the
different protocols supported by this equipment. The system starts accumulating statistics
when the TCP/IP Port is changed from off to local or wan, and it continues to store
information until it is turned off.
Figure 4-7 shows the first of four Network Statistics Screens, and Figure 4-7throughFigure
4-9show the other three screens. To go to the first screen, press “n” in the TCP/IP Screen to
choose Netstat from the bottom line of that screen. Table 4-6 lists the actions that can be taken
from the Network Statistics Screens, and the following paragraphs describe the parameters in
each screen.
Figure 4-7.Typical Network Statistics Screen, Page 1
To move from one screen (page) to another, press “d” (pgDn) or “u” (pgUp). Pressing “d”
goes to the next-highest page number. If you are on Page 4 when you press “d”, you will wrap
around to Page 1. Page 4 is currently not used on the IMACS-200, and therefore present not
data. Pressing “u” goes to the next-lowest page number. If you are on Page 1 when you press
“u”, you will wrap around to Page 4.