Specifications

General Features 4-9
IMACS-200 General Features User Screens and Settings
SYS CONT
In this field, enter the name of a person to contact for questions about the Integrated Access
System. This field can have up to 23 alphanumeric characters, including spaces. For
convenience, use the system administrator’s name in this field.
SYS LOC
In this field, specify the location of the Integrated Access System. This field can have up to 23
alphanumeric characters, including spaces.
ALRM SEQ
The Alarm Sequence setting establishes how the sequence number for alarms is generated. Set
this option to all if you want any alarm generated by the system to be assigned a sequence
number. Or, set this field to report if you want only the alarms set to report to have sequence
numbers.
ACO
The Alarm Cutoff (ACO) option reports a status to you based on the latch (condition held) or
cur (current condition) setting.
4.3.5 SYStem Ethernet Port
The Ethernet port allows the user to telnet into the IMACS-200 and allows for remote
management, configuration and downloading of host code via a 10baseT Ethernet port.
4.3.5.1 Setting Up the Ethernet Port
Before using the Ethernet port, the crafts person must perform the following steps: