Specifications

Model No.
Running Head
Disclaimer for Shielded Cables
This equipment was tested with shielded input/output and interface cables. It is recommended
that shielded cables be used to reduce interference whenever interference is suspected.
Panel and Cover Removal
Only qualified service technicians should attempt the removal of the cover.
Power Source
Please refer to Appendix A, System Specifications in the later in this guide regarding System
Requirements.
Ordering Guide
Following is a list of ordering codes for the IMACS-200.
IMACS-200 Ordering Guide
Model Number Description
IMACS-200-48VDC IMACS-200 System with a single -48 VDC power supply
IMACS-200-RDNT-48VDC IMACS-200 System with two -48 VDC power supplies
IMACS-200-48VDC-OHSU IMACS-200 System with a single -48 VDC power supply and
a 2 port OHSU daughter card
IMACS-200-RDNT-48VDC-OHSU IMACS-200 System with two -48 VDC power supplies and a
2 port OHSU daughter card
IMACS-200-AC IMACS-200 System with a single 120/220 VAC power supply
IMACS-200-RDNT-AC IMACS-200 System with two 120/220 VAC power supplies
IMACS-200-AC-OHSU IMACS-200 System with a single 120/220 VAC power supply
and a 2 port OHSU daughter card
IMACS-200-RDNT-AC-OHSU IMACS-200 System with two 120/220 VAC power supplies
and a 2 port OHSU daughter card
IMACS-200-125VDC IMACS-200 System with a single -125 VDC power supply
IMACS-200-RDNT-125VDC IMACS-200 System with two -125 VDC power supplies
IMACS-200-125VDC-OHSU IMACS-200 System with a single -125 Vdc power supply and
a 2 port OHSU daughter card
IMACS-200-RDNT-125VDC-OHSU IMACS-200 System with two -125 VDC power supplies and a
2 port OHSU daughter card