Specifications

4-2 General Features
Model No.
Running Head
User Screens and Settings IMACS-200 General Features
4.3.1 SYS port Main Screen
Figure 4-2 shows the SYS port Main Screen. You must configure the SYS port after logging
into the system for the first time. To view this screen, highlight the desired SYS port in the
System Main Screen and press <Enter>.
Figure 4-2.SYS port Main Screen
The SYS port has numerous settings that you must configure. The SYS Main Screen displays
the status of each SYS port (active or standby), the type of port installed, and the host software
version currently installed on that port. The settings are described in the next few sections of
this chapter.
The bottom highlighted line of the above screen shows a series of actions you can perform in
this menu. To perform an action, press the letter key associated with the uppercase letter of the
desired action. For example, to save your port option settings after making them, press “s” to
invoke the Save command. Table 4-1 lists and describes these actions.