Specifications

Alarm Ports 11-1
Alarm ports Introduction
Chapter 11
Alarm ports
11.1 Introduction
The IMACS-200 Alarm ports allow the system to report alarms to external alarm annunciators
and other systems. Each port also receives alarms reported by external devices. Each port has
switches for outbound alarms, and sensors that detect incoming alarms from the external
equipment.
The IMACS-200 provides four separate Alarm outputs and four separate alarm inputs. Each
one can be individually controlled by the system operator.These ports are discussed in detail
below.
Each port has two alarm notification modes. The "Switch/Act On" (outbound) function allows
you to report internal system alarms to external devices, such as buzzers, bells, and lights. The
"Sensor/Trig On" (inbound) function allows you to receive external alarms through sensors on
the port.