Specifications

8-2 Sub Rate Data Ports
Model No.
Running Head
SRU port User Screens and Settings SRU Ports
8.2 SRU port User Screens and Settings
You must configure the SRU port for operation before use. This is done from the SRU port
Main Screen (Figure 8-1). To go to that screen, highlight the desired port on the System Main
Screen and press <Enter>. The SRU port Main Screen has five columns of data for port
configuration purposes. The port numbers on the screen correspond to the port faceplate jacks.
Figure 8-1. Typical SRU port Main Screen
The highlighted bottom line of this screen shows numerous actions you can perform from this
screen. To perform an action, simply press the uppercase key indicated on this line. For
example, to save your option settings for this port, press “s”. Table 8-1 lists the actions you
can perform.