Specifications

3-36 Reference Guide
Model No.
Running Head
Cross-Connecting WAN Time Slots System Configuration and Operation
Table 3-4. T1-to-E1 Cross-Connections in Drop-and-Insert Mode
You can cross-connect WAN time slots from the System Main Screen. To perform
cross-connections, press “
x
” in that screen to invoke the
Xcon
command (with CPU XCON).
The CPU Cross-Connect Screen of Figure 3-23 appears. In the cross-connect screen, type “
a
”
to add a cross-connect circuit. The
Add
command provides the fields used to program all of
the "pass-through" circuits in the network. Figure 3-23 shows a typical CPU Cross-Connect
Screen, and Table 3-5 lists the circuit parameters and their options and default settings.
Figure 3-23. Typical CPU Cross-Connect Screen
T1 DS0E1 DS0T1 DS0E1 DS0
1 1 13 17
2 2 14 18
3 3 15 19
4 5 16 21
5 6 17 22
6 7 18 23
7 9 19 25
8 102026
9112127
10 13 22 29
11 14 23 30
12 15 24 31
Node_1 | C1 CPU-3 XCON Rev A0-0 Ser 00101 | 12-31-99 14:33
page: 1 of 1
CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV
new_circuit w1-1 00x64 off w1-1 00x64 off d moos n/a
Save