Specifications

3-26 Reference Guide
Model No.
Running Head
Time Slot Assignment System Configuration and Operation
Figure 3-14. Restore Screen
3.9 Time Slot Assignment
This chapter provides instructions for assigning DS0 time slots to the voice and data cards of
the integrated access system. It also provides time slot cross-connection and broadcast setup
instructions.
The integrated access system maximizes the use of incoming and outgoing T1 and/or E1 lines.
You can do this by assigning specific channels, or
DS0 time slots
, to voice and data cards in
the system. You also can cross-connect time slots between T1 and/or E1 WAN ports of the
system.
The CPU Card allows you to connect one DS0 time slot to another. Throughout this chapter,
these connections are called "pass-through" circuits because they link a time slot from one T1
or E1 line to another through the system. You can therefore have up to eight separate T1 or E1
links on four WAN cards, in any cross-connect combination.
Node_1 | NVRAM Restore | 12-31-99 14:33
C1 restore Install Table restore
C2 restore Cross Connect restore
P1 restore Alarm Filters restore
P2 restore Alarms History restore
P3 restore
P4 restore
W1 restore
W2 restore
W3 restore
W4 restore
IF restore
U1 restore
U2 restore
U3 restore
U4 restore
U5 restore
U6 restore
U7 restore
U8 restore
Go | Copy | Main