Specifications

3-22 Reference Guide

Model No.

Running Head

Test, Debug, Backup, & Restore System Configuration and Operation

3.8 Test, Debug, Backup, & Restore

Advanced configuration and diagnostics are available through the use of the

sYs

(

sYstem

)

command from the System Main Screen. Pressing “

y”

brings up the Test and Debug screen

shown in Figure 3-12.

Figure 3-12. System Test and Debug Screen

3.8.1 Backing Up the System to a File

The Backup procedure allows users to save the configuration parameters for all or some cards,

as well as the installation table, cross-connects, alarm filters, and alarm history. This

information can then be used with the

Restore

command (see below) to restore the parameter

data to certain cards or to the whole system. Figure 3-13 shows a sample of the Backup screen.

(The Restore screen is nearly identical to this.)

Test and Debug