Specifications

Model No.
Running Head
Individually covered or insulated equipment grounding conductors shall have a
continuous outer finish that is either green, or green with one or more yellow stripes. The
equipment-grounding conductor must be connected to ground at the service equipment.
2. The receptacles in the vicinity of the product or system must be of a grounding type.
The equipment-grounding conductors serving these receptacles are to be connected to
earth ground at the service equipment.
Operator Services Requirements
This equipment is capable of giving users access to interstate providers of operator services
through the use of equal access codes. Modifications by aggregators to alter these capabilities
may be in violation of the Telephone Operator Consumer Services Improvement Act of 1990
and Part 68 of the FCC Rules.
Safety Precautions
The equipment is designed and manufactured in compliance with Safety Standard EN60950.
However, the following precautions should be observed to ensure personal safety during
installation or service, and prevent damage to the equipment or equipment to be connected.
Grounding
The equipment can be grounded through the power cord as well as the terminal marked .
Notice!
For detailed information on grounding procedures, please see the Grounding
section in this Reference Guide.
Electrostatic Discharge Prevention
The plug-in cards contain components that could be damaged by electrostatic discharge.
Before handling any cards, wear a properly grounded wrist strap to prevent possible card
damage, or follow other suitable precautions to prevent equipment damage.