Specifications

3-10 Reference Guide
Model No.
Running Head
Basic Screen Map and Legend System Configuration and Operation
Figure 3-6. Typical Card Main Screen
The bottom line of each Card Main Screen lists other actions you can perform by simply
pressing the letter key that corresponds to the capital letter of your desired action. In Figure
3-6, for example, if you press “
s”
, you will invoke the
Save
command, which saves the current
option settings in the system’s memory. The actions you can choose from this line depends on
which card and screen you are currently accessing. Refer to the associated chapters in this
guide for descriptions of those actions.
3.3.6 Alarm Screens
Refer to Figure 3-7. To view the current system alarms, you can go from the System Main
Screen to an Alarm Screen. From the Alarm Screen, you can then go to an Alarm Filters
Screen and set up the alarm reporting filters. Or, you can go to an Alarm History Screen (log)
and view alarms that were previously logged by the system. These screens and operations are
discussed in the “Alarms and Alarm Filters” section later in this chapter.
Node_1 | IF INF+M Rev A2-0 Ser 01103 | 12-31-99 14:33
1
OOS U3
PRIMARY CLK
int
EXT RATE n/a
EXT FORMAT n/a
EXT FRAME n/a
SECONDARY CLK int
EXT RATE n/a
EXT FORMAT n/a
EXT FRAME n/a
CURRENT CLK int
int ext serv wan user
Save | Undo | Refresh | Time | ACO | proFiles | taBs | Ports | Main