Specifications

Important Safety Instructions
1. Read and follow all warning notices and instructions marked on the product or included
in this Reference Guide.
2. This product is intended to be used with a three-wire grounding type plug - a plug
which has a grounding pin. This is a safety feature. Equipment grounding is vital to
ensure safe operation. Do not defeat the purpose of the grounding type plug by modifying
the plug or using an adapter.
Prior to installation, use an outlet tester or a voltmeter to check the AC receptacle for the
presence of earth ground. If the receptacle is not properly grounded, the installation must
not continue until a qualified electrician has corrected the problem. If a three-wire
grounding type power source is not available, consult a qualified electrician to determine
another method of grounding the equipment.
3. Slots and openings in the cabinet are provided for ventilation. To ensure reliable
operation of the product and to protect it from overheating, these slots and openings must
not be blocked or covered.
Notice!
DO NOT place anything directly on top of unit that can block air holes.
4. Do not allow anything to rest on the power cord and do not locate the product where
persons could step or walk on the power cord.
5. Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous high voltage points or other risks. Refer all servicing to qualified
service personnel.
6. Special cables, which may be required by the regulatory inspection authority for the
installation site, are the responsibility of the customer.
7. When installed in the final configuration, the product must comply with the applicable
Safety Standards and regulatory requirements of the country in which it is installed. If
necessary, consult with the appropriate regulatory agencies and inspection authorities to
ensure compliance.