Specifications

Reference Guide B-11
No more than two WANs in BERT test are allowed.
You can place only two WAN ports in the BERT test mode simultaneously.
No second net-lb allowed when bw = 115.2 kbps.
You cannot activate more than one network loopback at a time on an SRU card port.
No timeslot(s) specified.
You cannot activate a user card that doesn’t have any WAN time slots assigned to it.
No Voice Compress. WAN card using ALL resources.
No ADPCM card is currently available for voice compression.
Not applicable for S/T card.
This does not apply for a BRI S/T card.
Not enough available U-slots.
You cannot use the Configuration option with less than three available user card slots in the
chassis for T1 operation, or four available user card slots for E1 operation.
Not implemented yet.
You cannot use a feature or function that is not yet released. This message normally appears
on software versions for beta testing.
Not supported.
This command is currently not supported by the system.
Number of TS from must be equal to TS to.
You cannot assign a time slot cross-connection with an unequal number of “from” (source)
and “to” (destination) time slots.