Specifications
Reference Guide 6-39
WAN Card WAN Card User Screens and Settings
Figure 6-31. Typical HDSL Performance Data Screen (local 15-minute interval)
Figure 6-31 shows the number of Errored Seconds (ES), Severely Errored Seconds (SES), and
Unavailable Seconds (UAS) in loops 1 and 2 (local or remote), in either 15-minute or 24-hour
increments. This allows for four different possible displays:
•
15-minute intervals, Local Loop (default)
•
15-minute intervals, Remote Loop
•
24-hour intervals, Local Loop
•
24-hour intervals, Remote Loop
You can alternate between screens by selecting from the actions at the bottom of the screen.
When 15-minute intervals are active, pressing “
h
” (
24 H
r
) changes the display to 24-hour
intervals (see Figure 6-32). Pressing “
i
” (
15 mI
n
) in the 24-hour interval mode will go back
to a 15-minute interval display. Similarly, press “
e
” (
rE
mote
) in the Local screen to go to the
Remote screen, and press “
l
” (
L
ocal
) in the Remote screen to return to the Local screen.
Node_1 | W1 H_E1+H_E1 Rev A0-0 Ser 00101 12-31-99 14:33
Unit 1 HDSL Performance (15 Min Interval) *Local*
LOOP 1 LOOP 2
ES SES UAS ES SES UAS STATUS
CUR 0 0 0 0 0 0 T..T..
01 0 0 0 0 0 0 ......
02 0 0 0 0 0 0 ......
03 0 0 0 0 0 0 ......
04 0 0 0 0 0 0 ......
05 0 0 0 0 0 0 ......
06 0 0 0 0 0 0 ......
07 0 0 0 0 0 0 ......
08 0 0 0 0 0 0 ......
09 0 0 0 0 0 0 ......
10 0 0 0 0 0 0 ......
11 0 0 0 0 0 0 ......
12 0 0 0 0 0 0 ......
TOTAL 0 0 0 0 0 0 ......
STATUS: L=LOS R=REVERSED T=TEST
Refresh | Clearregs | 24 Hr | 15 mIn | rEmote | Local | pgUp | pgDn | Main