Specifications

6-34 Reference Guide
Model No.
Running Head
WAN Card User Screens and Settings WAN Card
Figure 6-29. Typical WAN Card Test Screen
Table 6-10. Test Screen Actions
Table 6-11. WAN Card Test Screen Options
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
Insert Err Allows you to manually insert a single bit error into the data signal. This does
not cause a CRC error.
Clear Clears the Test Screen and resets all counters to zero.
Main Returns to the WAN Card Main Screen. If changes are made to settings and
not saved, you will be prompted to save or abandon those changes.
Parameter User Options Notes Default
BERT off mark space 1:1 1:7 3:24 qrss lp-up lp-dn 1 off
SYNC information only–no user options
BE information only–no user options
ES information only–no user options
SES information only–no user options
CSES information only–no user options
OSS information only–no user options
BER information only–no user options
ELAP information only–no user options
LB STATE information only–no user options
Node_1 | W1 CEPT+CEPT Rev A6-2 Ser 00101 | 12-31-99 14:33
CEPT CEPT
BERT n/a n/a
SYNC no no
BE 0 0
ES 0 0
SES 0 0
CSES 0 0
OSS 0 0
BER 0.0e+1 0.0e+1
ELAP 0 0
LB STATE llb plb
Save | Undo | Refresh | InsertErr | Clear | Main