Specifications

6-32 Reference Guide
Model No.
Running Head
WAN Card User Screens and Settings WAN Card
Figure 6-28. Typical Far-End Performance Data Screen
Press “
c
” (
Clear
command) from the bottom line of this screen to send a FDL message to the
far end and also clear the local display. The following message will now appear:
“
Ok to clear performance (y/n) ?”
Press “
y
” to clear the statistics, or “
n
” to leave the screen contents intact. To view the far-end
information again, press “
r
” (restore) to send an FDL message and refresh the screen. Table
6-9 lists the actions available from the above screen.
Table 6-9. Far-End Performance Data Screen Actions
Action Function
Refresh Because data is not calculated in real time, the Refresh command must be
used to update the screen with new information.
Clear Clears the Far-End Network Registers display on the local terminal.
PgUp Pages through the performance statistics for the current 15-minute period
and periods 96-1.
PgDn Pages through the performance statistics for the current 15-minute period
and periods 1-96.
Main Returns to the WAN Card Main Screen.
Node_1 | W1 H_E1+H_E1 Rev A1-0 Ser 00101 | 12-31-99 14:33
Unit 1 AT&T FAREND STATISTICS NETWORK REGISTERS Sec. 240 of 900
ES UAS SES BES LOFC SLIP
CUR000000
01 ***** ***** ***** ***** ***** *****
02 ***** ***** ***** ***** ***** *****
03 ***** ***** ***** ***** ***** *****
04 ***** ***** ***** ***** ***** *****
05 ***** ***** ***** ***** ***** *****
06 ***** ***** ***** ***** ***** *****
07 ***** ***** ***** ***** ***** *****
08 ***** ***** ***** ***** ***** *****
09 ***** ***** ***** ***** ***** *****
10 ***** ***** ***** ***** ***** *****
11 ***** ***** ***** ***** ***** *****
12 ***** ***** ***** ***** ***** *****
TOTAL 000000
Retrieving message. Please wait...
Refresh | Clear | pgUp | pgDn | Main