Specifications

Reference Guide 5-11
Interface Card Interface Card User Screens and Settings
Figure 5-9. Typical Interface Card Main Screen
The bottom line of this screen shows numerous actions that you can perform from the screen.
To perform an action, simply press the associated capital letter on your keyboard. For example,
to save your option settings, press “
s
” (for
Save
). Table 5-6 lists the available actions.
Table 5-6. Interface Card Main Screen Actions
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Used to redraw the screen.
Time Sets the system time and date. See the “Setting the System Date and Time”
section later in this chapter.
ACO ACO alarm.
proFiles Profiles function inoperable with this release.
taBs Signaling conversion tables for ABCD bits from ANSI to ITU-T for voice
circuits.
Ports Allows you to configure each Interface card port for operation. See the
“Ports Screen” section later in this chapter.
Main Returns to the Main screen. If changes are made to settings and not saved,
you will be prompted to save or lose changes.
Node_1 | IF INF+M T1E1x8 Rev A0-0 Ser 01103 |12-31-99 14:33
1
PRIMARY CLOCK int
EXT RATE n/a
EXT FORMAT n/a
EXT FRAME n/a
SECONDARY CLK int
EXT RATE n/a
EXT FORMAT n/a
EXT FRAME n/a
CURRENT CLK int
Save | Undo | Refresh | Time | ACO | proFiles | taBs | Ports | Main