Specifications
Reference Guide 4-29
CPU Card IP Packet Routing
Table 4-8. Settings for Routing Parameters
IP NET
The IP Net field shows the IP address of a device located on this system unit. This must be a
valid IP address.
SUBNETMASK
The Remote Netmask field shows the Netmask of a device located remotely from this system.
Any valid Netmask is acceptable. The remote netmask information is the same as that placed
on the remote unit’s TCP/IP screen.
SLOT/UNIT
The Default Destination specifies where a route packets received from a remote device and the
routing device to downstream NMS equipment (either the optional paths of a WAN link or the
local SLIP port).
Table 4-9. Routing Screen Actions
Parameter User Options Default
IP NET a valid IP address 0.0.0.0
SUBNETMASK a valid SubNetMask address 0.0.0.0
SLOT/UNIT wan: W1-1 through W2-4
serv: P1-P3
user: not supported
local: COMPT
w1-1
Action Function
Save Saves changes to settings.
Refresh Used on Testing and Monitoring screens to update statistics and on other
screens to redraw the screen.
Add Open the data entry screen to add a route
dEl Delete a route
Get Get information on routing destinations
PgUp Go to a previous page of routing paths
PdDn Go to the next page of routing paths
Main Returns to the CPU card main screen. If changes are made to settings and
not saved, you will be prompted to save or lose changes.