Specifications

Reference Guide 4-15
CPU Card TCP/IP Network Management
Figure 4-6. Typical Network Statistics Screen, Page 1
To move from one screen (page) to another, press “
d
” (
pgDn
) or “
u
” (
pgUp
). Pressing “
d
”
goes to the next-highest page number. If you are on Page 4 when you press “
d
”, you will warp
around to Page 1. Pressing “
u
” goes to the next-lowest page number. If you are on Page 1 when
you press “
u
”, you will wrap around to Page 4.
Table 4-6. Network Statistics Screen Actions
Action Function
pgUp Scrolls backward through network statistics, one page at a time. If you are
on the first screen (Page 1), automatically “wraps around” back to the fourth
screen (Page 4).
pgDn Scrolls forward through network statistics, one page at a time. If you are on
Page 4, automatically “wraps around” back to Page 1.
Refresh Since the system does not update statistics automatically, the Refresh
command must be used to update information in statistics fields.
Main Returns to the TCP/IP Screen. If changes are made to settings and not saved,
you will be prompted to save or lose changes.
Node_1 | C1 CPU-3 XCON Rev C3-0 Ser 01103 | 12-31-99 14:33
NETSTAT Page 1 of 4
SLIP
MTU Size 240
Bytes Received 0
Packets Received 0
Packets Discarded 0
Packets Dropped - buffer 0
Buffer Overflow 0
Packets Sent Out 0
Bytes Sent Out 0
FDL
MTU Size 240
Frames Received 0
Frames Aborted on Receive 0
Frames To Transmit from Above 0
Frames Transmitted 0
Frames Aborted on Transmit 0
pgUp | pgDn | Refresh | Main