Specifications

4-14 Reference Guide
Model No.
Running Head
TCP/IP Network Management CPU Card
RPT2 COMMUN STR
The RPT2 Community String holds the community string for the second NMS host running a
SNMP trap server. The community string provides additional security by rejecting messages
that do not contain the correct string.
There must be some entry in this field to enable RPT2.
RPT3 IP ADDR
The RPT3 IP Address is the IP address of the third Network Management System host running
an SNMP trap server.
RPT3 COMMUN STR
The RPT3 Community String holds the community string for the third NMS host running a
SNMP trap server. The community string provides additional security by rejecting messages
that do not contain the correct string.
There must be an entry in this field to enable RPT3.
4.4.1 Network Statistics Screens
The Network Statistics Screens provide maintenance and diagnostic information for the
different protocols supported by this equipment. The system starts accumulating statistics
when the TCP/IP Port is changed from
off
to
local
or
wan
, and it continues to store
information until it is turned off.
Figure 4-6 shows the first of four Network Statistics Screens, and Figure 4-7 through Figure
4-9 show the other three screens. To go to the first screen, press “
n
” in the TCP/IP Screen to
choose
Netstat
from the bottom line of that screen. Table 4-6 lists the actions that can be taken
from the Network Statistics Screens, and the following paragraphs describe the parameters in
each screen.