Specifications

4-4 Reference Guide
Model No.
Running Head
CPU Card User Screens and Settings CPU Card
SUPERUSER
The "Superuser" password level is reserved for use only by factory personnel. You cannot edit
this password.
MANAGER, OPERATOR, AND VIEWER
The other three passwords are called "Manager," "Operator" and "Viewer.” Each password can
have up to 14 characters (letters and numbers only). All three passwords are case-sensitive.
4.3.1.2 Other CPU Card Settings
You also must set the additional card parameters described below in the CPU Card Main
Screen. Most of these are user-defined alphanumeric entries. To make new entries in these
fields, first press <Enter> to highlight the current entry in the lower left of the screen. Then,
type the new data on the keyboard. If you make a mistake, press either the backspace or
<Delete> key to back up the cursor and erase the incorrect characters. Then, retype the correct
characters. Finally, press <Enter> again to store the new entry in the field.
NODE ID
In this field, enter a 14-character node name for the integrated access system. This entry must
be unique for each system in your network. It can have alphanumeric characters and spaces.
SYS CONT
In this field, enter the name of a person to contact for questions about the integrated access
system. This field can have up to 23 alphanumeric characters, including spaces. For
convenience, use the system administrator’s name in this field.
SYS LOC
In this field, specify the location of the integrated access system. This field can have up to 23
alphanumeric characters, including spaces.
SYS PH#
Type the phone number of the integrated access system in this field. This phone number is used
by a remote operator to access the system for a VT-100 session, via either ISDN D-channel
dialing or a remote terminal system. You can enter up to 10 numeric characters in this field.
However, do not include any dashes in this entry.