Specifications

4-2 Reference Guide

Model No.

Running Head

CPU Card User Screens and Settings CPU Card

4.2.1.2 Installing the Card

Install the CPU-3 card into slot C1 of the system chassis. If your system will use redundant

CPU cards, also install another identical card into slot C2. The card in slot C1 will be the

master, and the card in slot C2 will be the slave.

4.3 CPU Card User Screens and Settings

The CPU card has several user interface screens for card configuration and network status

viewing purposes. These screens are described in the remainder of this chapter.

4.3.1 Main Screen

Figure

shows the CPU Card Main Screen. You must configure the CPU card after logging

into the system for the first time. To view this screen, highlight the desired CPU card in the

System Main Screen and press <Enter>.

Figure 4-1. CPU Card Main Screen

Node_1 | C1 CPU-3 XCON Rev A0-0 Ser 01103 | 12-31-99 14:33

NODE ID Node_1

SUPERUSER *********

MANAGER Manager

OPERATOR Operator

VIEWER Viewer

SYS CONT System Contact

SYS LOC System Location

SYS PH# 5105551574

ALRM SEQ all

ACO cur

C1 Active Host 3.7.0 Voice 3.7.0