Specifications

Europe
European Telecommunication Approvals
Under the Telecommunications Terminal Directive the following connections are approved:
The WAN DUAL card, the WAN SINGLE card, and the 120 ohm version of the DSX/CEPT
module are approved for connection to ONP unstructured and structured 2048 kbps digital
leased lines with G.703 interfaces, following assessment against CTR12 and CTR13.
United Kingdom
UK Approval Number
The BABT approval number is M606037.
The WAN DUAL card, the WAN SINGLE card, and the 75 ohm version of the DSX/CEPT
module, connected via the BNC connector panel are approved for connection to UK 2048 kbps
digital leased lines with G.703 (75Ohm) interfaces.
UK Compliance Statements
The E1 Interface is approved in the UK for direct connection to PTO-provided circuits
operating at data rates up to 2.4Mbit/s.
The E1 Interface comprises a combination of single or dual WAN cards, CEPT modules, and
connector panels as listed in the UK approval documentation.
The approved configuration options are shown below.
WAN Card
Single/Dual
800020/801020
CEPT Module
811
Interface Card
89xx
Connector Panel
1181/1181UK
1183/1183UK
118320
1184
PTN
I/F