Specifications

3-68 Reference Guide

Model No.

Running Head

Using the Broadcast Option System Configuration and Operation

Figure 3-56. TLA Circuit State Screen

Table 3-9. TLA Circuit State Screen Menu of Actions

Action Funtion

moNitor The Monitor command allows the user to create a monitor circuit at the

WAN interface. See section above.

spLit The Monitor command allows the user to create a split circuit at the WAN

interface. See section above.

Release The Release command allows the user to release and restore a split circuit or

a monitor circuit. See section above.

Tla The Terminate and Leave Access (TLA) command is the capability to

terminate one or both directions of transmission on a circuit. See section

above.

pgUp The pgUp) action is initiated by pressing the "u" key. Since the system can

handle many different TADS circuits, you may fill the screen allotment for

data. New pages will be added automatically to accommodate additional

circuits. Use this command to scroll up through the pages of TADS

information.

pgDn The pgDn (Page Down) action is initiated by pressing the "d" key. This

action is similar to the pgUp command. Use this command to scroll down

through the pages of cross-connect information.

Main Pressing "m" (Main) will return you to the cross-connect screen.

Node_1 | C1 10161 CPU XCON COM 407535038 Ser 00101 | 12-31-99 14:33

page: 1 of 1

CIRCUIT ID FACILITY TEST EQUIPMENT TEST TYPE TC CNV

Jacksonville w1-1 01*64 mon w1-2 01*64 off d moos n/a

monitor ckt w1-1 01*64 off w2-1 01*64 off m/d moos n/a

monitor ckt w1-2 01*64 off w2-1 01*64 off m/d moos n/a

Jacksonville w1-1 01*64 mon w1-2 01*64 off d moos n/a

mon uac