Specifications

3-56 Reference Guide
Model No.
Running Head
Using the Broadcast Option System Configuration and Operation
Broadcast circuits can be initiated, updated, or deleted only from the broadcast screen.
To access the Broadcast option, press "
v
" (for
View all
) in the Main Cross-Connect Screen.
The All Circuits Screen of Figure 3-42 appears. In addition to the WAN card-to-WAN card
cross-connects, this screen also shows all user card-to-WAN card time slot assignments
for all
WAN cards.
Because this screen shows all WAN time slots that are either assigned to user cards or
cross-connected to other time slots, it may be filled with data.
Figure 3-42. Typical All Circuits Screen
In addition to the two WAN-to-WAN cross-connects shown in Figure 3-41, an HSU circuit
from slot U4-1 to the San Francisco T1 circuit (on WAN 1-1), and an HSU circuit from slot
U4-2 to Phoenix (on WAN 2-2) are shown in Figure 3-42.
To select the broadcast option, place the cursor over the User card circuit that will be copied.
In this case, it will be the Denver end of the Denver-to-San Francisco link on WAN 1-1. Then,
press the "
b
" (
Bcast
) key from the actions at the bottom of the screen.
The screen of Figure 3-42 shows the dynamics of the first copy of that circuit. Press the
<Enter> key to access and modify the connection options.
Node_1 | C1 CPU-3 XCON Rev A0-0 Ser 00101 | 12-31-99 14:33
page: 1 of 1
CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV
user_circuit
w4-1 06*56 off w1-1 06*56 off d n/a n/a
user_circuit w4-2 06*56 off w2-2 06*56 off d n/a n/a
SF-SLC w1-1 01*64 off w2-1 01*64 off v n/a no
HST-PHX w1-2 01*64 off w2-2 01*64 off v n/a no
Bcast | uPdate | dElete | pgUp | pgDn | Main