Installation guide

Configuring IPTV, Active Ethernet

FTTH Application Guide

Configuring IPTV, Active Ethernet

We will use the fast path feature to define a 999 VLAN which pushes the

packets directly out to LAN port 3.

Figure 23: Passing data and video packets on separate bridges

Configuring the zNID for IPTV

1 Open Fast Path

a From the left hand menu pane, click Advanced

b Click the Fast Path icon

2 Select the ports

a Select the subscriber port(s)

We will select Ethernet Port 3

b From the WAN Device dropdown, select the WAN interface (WAN

PON)

3 Define the VLAN by entering the VLAN ID (999) in the VID text box

4 In the Priority text box enter a priority (3)

5 Click OK

Configuring the MXK for IPTV

1 Create uplink and add bridge-path

The switch which is upstream from our MXK is providing a video stream

on VLAN 999. The packets are tagged from the switch.The bridge-path

add command defines this bridge interface as the uplink for the VLAN

999 downlinks.

Note: For all of the scenario examples in this application guide

we are using the same uplinks/upstream interfaces, so if you have

already created the uplink/upstream bridge interfaces, you will

not need to recreate the uplink/bridge-path here.

zSH> bridge add 1-a-5-0/eth uplink vlan 999 tagged