Installation guide

Configuring browser-based Active Ethernet zNIDs
FTTH Application Guide
95
i Name the interface by clicking the edit icon for the WAN Ethernet
interface you just created, then enter an appropriate name in the
Name text box and click OK
We will use Data VLAN 200 WAN Ethernet.
2 Add a VLAN ID to the LAN switch
a Click Network Connections in the left hand menu pane
b In the Networks Connection page, click New Connection
c In the Connection Wizard screen select Advanced Connection and
click Next
d In the Advanced Connection screen select VLAN Interface and
click Next
e From the Underlying Device dropdown select the Ethernet switch to
associate with the VLAN ID (LAN Hardware Ethernet Switch)
f In the VLAN ID text box enter the VLAN ID (200), then click Next
g In the Connection Summary screen select Edit the Newly Created
Connection, then click Finish, view the screen then click OK
h Name the interface by clicking the edit icon for the LAN Ethernet
interface you just created, then enter an appropriate name in the
Name text box and click Next
We will use Data VLAN 200 LAN Ethernet.
3 Build the bridge between (among) the interfaces
a Click Network Connections in the left hand menu pane
b In the Networks Connection page, click New Connection
c In the Connection Wizard screen select Advanced Connection and
click Next
d In the Conneciton Wizard screen select
Network Bridging then
click Next
e Select the connections to combine in the bridge (Data VLAN 200
WAN Ethernet and Data VLAN 200 LAN Ethernet) then click Next
f In the Connection Summary screen select Edit the Newly Created
Connection then click Finish
g In the Internet Protocol drop down you should have Obtain an IP
address automatically selected; click OK
h Rename the bridge by clicking the edit icon for the bridge you just
created in the Network Connections screen, then enter Data VLAN
200 Bridge in the Name text box and click OK
4 Map the VLAN ID to the physical port
a Click Network Connections in the left hand menu pane