Installation guide

Configuring browser-based GPON zNIDs
FTTH Application Guide
77
e From the Underlying Device drop down select the physical WAN
port (WAN PON) to associate with the VLAN ID
f In the VLAN ID text box enter the VLAN ID (200), then click Next
g In the Connection Summary screen select Edit the Newly Created
Connection, then click Finish
h Verify the WAN Ethernet interface has been created, then click OK
Figure 18: The create WAN Ethernet interface
i Name the interface by clicking the edit icon for the WAN Ethernet
interface you just created, then enter an appropriate name in the
Name text box and click OK
We will use Data VLAN 200 WAN Ethernet.