Installation guide

FTTH Application Guide 69
steps, even comments; the duplication of procedures is for those who only
read the procedure that interests them.
Topics to be covered in the examples in this chapter:
• Deploying and managing overview, page 70
• Overview of the configuration process, page 72
• Configuring browser-based GPON zNIDs, page 75
– Configuring a bridge for data, GPON, page 75
– Configuring IPTV, GPON, page 84
– Configuring VoIP, GPON, page 87
– Configuring Triple Play: Data, Video and Voice, GPON, page 91
• Configuring browser-based Active Ethernet zNIDs, page 92
– Configuring a bridge for data, Active Ethernet, page 92
– Configuring IPTV, Active Ethernet, page 99
– Configuring VoIP, Active Ethernet, page 102
– Configuring Triple Play: Data, Video and Voice, Active Ethernet,
page 106
Configuring the browser-based zNID is much like configuring modems,
routers, gateways or other network access devices. You log into the zNID with
a browser, then configure the zNID, adding bridges for the services you want
the zNID to provide.
Figure 11: Configure the browser-based zNID