Installation guide

Create VoIP on GPON OMCI with TLS bridges

FTTH Application Guide

3 Ping the video server

a Open a DOS window

b Ping the upstream gateway (provided in your environment setup)

4 Open the STB emulation software and connect to the video server

As long as you can ping you are showing that you have a data path

through the zNID and the MXK to the video server. You should be able to

connect to the video stream with the STB emulation software.

Create VoIP on GPON OMCI with TLS bridges

For VoIP service we recommend to use TLS bridging.

Creating GPON Traffic Profile

Add the GTP.

The following GTP is recommended for up to four VoIP phones or four

POTS ports.

zSH> new gpon-traffic-profile 3

gpon-traffic-profile 3

Please provide the following: [q]uit.

guaranteed-upstream-bw: -> {0}: 512

traffic-class: ----------> {ubr}: cbr

compensated: ------------> {false}:

shared: -----------------> {false}:

dba-enabled: ------------> {false}:

dba-fixed-us-ubr-bw: ----> {0}:

dba-fixed-us-cbr-bw: ----> {0}:

dba-assured-us-bw: ------> {0}:

dba-max-us-bw: ----------> {0}:

dba-extra-us-bw-type: ---> {nonassured}:

....................

Save new record? [s]ave, [c]hange or [q]uit: s

New record saved..

Creating TLS bridge

We will create a TLS bridge for VLAN 300:

1 Create a TLS bridge on the uplink interface.

zSH> bridge add 1-a-5-0/eth tls vlan 300 tagged

Adding bridge on 1-a-5-0/eth

Created bridge-interface-record ethernet5-300/bridge

2 Create a TLS bridge on the downlink interface.

zSH> bridge add 1-4-4-701/gponport gtp 3 tls vlan 300

tagged