Installation guide

Create High Speed Internet on GPON OMCI with Uplink and Downlink
FTTH Application Guide
59
Activating ONT
Activate the ONT to add it to the system. If you are adding multiple services,
you would range the ONT after all the services have been added.
Note: Only run the gpononu set command once to add the ONT. If
the ONT has been activated and the OMCI profiles are configured for
other service, you may add other bridges without resetting the ONT.
If you change OMCI profiles you will need to resync/reboot the ONT.
To resync ONT use the gpononu resync <slot>[/<olt>[/<onu>]]
command. To reboot ONT use the gpononu reboot <slot>[/<olt>[/
<onu>]] command.
1 To activate an ONT first run the gpononu show command to display the
ONTs currently on the OLT, and discover the available serial numbers.
The gpononu show command has options to select by slot and OLT. If
you run the command without defining the slot/OLT the command will
check for ONTs on every port of every card and depending on the number
of cards, may take a long time to complete.
zSH> gpononu show 4/4
Processing list of 128
This command may take several minutes to complete.
Do you want to continue? (yes or no) [no] yes
Free ONUs for slot 4 olt 4:
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
49 50 51 52 53 54 55 56 57 58 59 60
61 62 63 64
Discovered serial numbers for slot 4 olt 4:
sernoID Vendor Serial Number sernoID Vendor Serial Number
1 CIGG 138543368
2 Run the gpononu set command to associate a serial number to the
appropriate ONT:
zSH> gpononu set 4/4/1 1
Onu 1 successfully enabled with serial number CIGG
138543368
3 Run the gpononu show command to verify the ONT is enabled, and
OMCI support is added into the ONT (the associated ME profile and
Generic profile can be displayed).
zSH> gpononu show 4/4/1
Serial
ONU Name Enabled Number OMCI files and profiles
=== ================= ======= =============== ================================