Installation guide

OMCI based GPON zNID
58 FTTH Application Guide
31 "POTS 1 Admin Status"
32 "POTS 2 Admin Status"
Enter OMCI edit command: 14
Enter value: 2012000984
Enter OMCI edit command: 15
Enter value: 2012000984
Enter OMCI edit command: 16
Enter value: password
...
Enter OMCI edit command: s
SPECIFIC profile has been saved
2 Make sure every variable has value assigned, otherwise configuration
fails unless updating Generic profile or Specific profile to assign a value.
To view the current settings of configuration variables on ONU 4/4/1
enter:
zSH> gpononu profiles show vars 4/4/1
Variable Description Value Source
------------------------------------------- ------------------ --------
1 ETH1 Tagging mode: 0-Pass through, 1-Tagging, 2-QinQ 1 Generic
2 ETH1 VLAN 100 Generic
3 ETH1 Forward Oper 1 Generic
4 ETH2 Tagging mode: 0-Pass through, 1-Tagging, 2-QinQ 1 Generic
5 ETH2 VLAN 1 Generic
6 ETH2 Forward Oper 100 Generic
7 ETH3 Tagging mode: 0-Pass through, 1-Tagging, 2-QinQ 1 Generic
8 ETH3 VLAN 999 Generic
9 ETH3 Forward Oper 1 Generic
10 ETH4 Tagging mode: 0-Pass through, 1-Tagging, 2-QinQ 1 Generic
11 ETH4 VLAN 999 Generic
12 ETH4 Forward Oper 1 Generic
13 Country Code 0x348 Specific
14 POTS1 Dial Number 2012000984 Specific
15 POTS1 User Name 2012000984 Specific
16 POTS1 Password password Specific
17 POTS2 Dial Number 2012000985 Specific
18 POTS2 User Name 2012000985 Specific
19 POTS2 Password password Specific
20 VOICE VLAN 300 Specific
21 SIP Proxy IP 172.16.60.51 Specific
22 SIP Host IP Option: 2-static, 3-DHCP 3 Specific
23 SIP Host IP 0.0.0.0 Default
24 SIP Netmask 0.0.0.0 Default
25 SIP Gateway 0.0.0.0 Default
26 SIP Domain test.zhone.com Specific
27 ETH 1 Admin Status: 0-Up, 1-Down 0 (up) Default
28 ETH 2 Admin Status: 0-Up, 1-Down 0 (up) Default
29 ETH 3 Admin Status: 0-Up, 1-Down 0 (up) Default
30 ETH 4 Admin Status: 0-Up, 1-Down 0 (up) Default
31 POTS 1 Admin Status: 0-Up, 1-Down 0 (up) Specific
32 POTS 2 Admin Status: 0-Up, 1-Down 0 (up) Specific