Installation guide

Create High Speed Internet on GPON OMCI with Uplink and Downlink
FTTH Application Guide
57
Creating Specific profile for new user
On MXK create and modify Specific profile for each user; in the case of
specific profiles, the OMCI supports are associated with the ONT.
Only one Specific profile can be added on an ONT.
If you are adding a new user you would start at this point.
1 Create and modify Specific profile.
a Create the Specific profile, selecting the ME profile and Generic
profile to associate with the Specific (user) profile.
zSH> gpononu profiles create spec 4/4/1
2510-config1 2510-service-plan1
Profile created
b Update Specific profile.
zSH> gpononu profiles update spec 4/4/1
Specific Profile: 4/4/1
1 "ETH1 Tagging mode: 0-Pass through, 1-Tagging,
2-QinQ"
2 "ETH1 VLAN"
3 "ETH1 Forward Oper"
4 "ETH2 Tagging mode: 0-Pass through, 1-Tagging,
2-QinQ"
5 "ETH2 VLAN"
6 "ETH2 Forward Oper"
7 "ETH3 Tagging mode: 0-Pass through, 1-Tagging,
2-QinQ"
8 "ETH3 VLAN"
9 "ETH3 Forward Oper"
10 "ETH4 Tagging mode: 0-Pass through, 1-Tagging,
2-QinQ"
11 "ETH4 VLAN"
12 "ETH4 Forward Oper"
13 "Country Code"
14 "POTS1 Dial Number"
15 "POTS1 User Name"
16 "POTS1 Password"
17 "POTS2 Dial Number"
18 "POTS2 User Name"
19 "POTS2 Password"
20 "VOICE VLAN"
21 "SIP Proxy IP"
22 "SIP Host IP Option: 2-static, 3-DHCP"
23 "SIP Host IP"
24 "SIP Netmask"
25 "SIP Gateway"
26 "SIP Domain"
27 "ETH 1 Admin Status"
28 "ETH 2 Admin Status"
29 "ETH 3 Admin Status"
30 "ETH 4 Admin Status"