Installation guide

Create High Speed Internet on GPON OMCI with Uplink and Downlink
FTTH Application Guide
55
Enter OMCI edit command or [s]ave, [q]uit, [h]elp:1
Enter value: 1
Enter OMCI edit command: 2
Enter value: 100
Enter OMCI edit command: 3
Enter value: 1
Enter OMCI edit command: 4
Enter value: 1
...
Enter OMCI edit command: s
GENERIC profile has been saved
Create High Speed Internet on GPON OMCI with Uplink and
Downlink
The High Speed Internet application uses uplinks and downlinks with a
VLAN. You should notice from the flowchart and procedures that
provisioning video also uses uplink/downlink bridge configuration, just the
GEM port setup (from the OMCI profile), GTP and VLAN are different. For
triple play services (As long as the OMCI profiles are configured properly)
you can add the video bridge or VoIP bridge in the same process. For ease of
discussion each of the applications is described separately in this chapter.
For data service we will create uplink/downlink bridges with VLAN 100.
Creating GPON Traffic Profile
GPON traffic profiles are a template for defining how traffic will be
handled on the bridge with which the GTP is associated. GTPs are
templates in that one GTP may be associated with many different bridges.
The GTP in this procedure will create a high bandwidth configuration.
The GTP defines how the traffic will be handled. GTPs may be used for
multiple bridge configurations.
The following is recommended for high speed data configurations.
zSH> new gpon-traffic-profile 1
gpon-traffic-profile 1
Please provide the following: [q]uit.
guaranteed-upstream-bw: -> {0}: 1024
traffic-class: ----------> {ubr}: ubr is the default value
compensated: ------------> {false}:
shared: -----------------> {false}:
dba-enabled: ------------> {false}:
dba-fixed-us-ubr-bw: ----> {0}:
dba-fixed-us-cbr-bw: ----> {0}:
dba-assured-us-bw: ------> {0}:
dba-max-us-bw: ----------> {0}:
dba-extra-us-bw-type: ---> {nonassured}:
....................
Save new record? [s]ave, [c]hange or [q]uit: s