Installation guide

FTTH Application Guide 5
ABOUT THIS GUIDE
This guide is intended for use by technicians, installers, system administrators
and network administrators. It explains how to configure the Zhone products
within the context of Fiber to the home, business, multi-dwelling unit (FTTx)
application scenario.
This guide describes how to build a few basic bridging scenarios which are
building blocks to creating advanced and complex networks. The idea is that
as you build a scenario, you understand the implications of the commands you
are using to build the scenario, then once the scenario is built you can test the
scenario for the functions it provides.
For information on installing the MXK chassis and cards, refer to the MXK
Hardware Instlallation Guide. For greater information about specific
configuration procedures for the MXK, please refer to the MXK
Configuration Guide.
Since OMCI based GPON zNIDs are mainly configured on the OLT (MXK),
all the configuration information is in the MXK Configuration Guide.
Hardware installation instructions for OMCI based zNIDs are in zNID xxxx
Quick Installation Instructions, where xxxx is the model number of the zNID,
for example zNID GPON 2510. For the OMCI based model used in this
guide, see the zNID GPON 2510 Quick Installation Instructions.
For more information on the browser based zNIDs, see the zNID Admin &
Config Guide and the zNID Hardware Installation Guide.
This guide only attempts to introduce technical topics. The idea is not to
explain industry standards, but explain the Zhone perspective on the standard
and how to implement solutions using Zhone products.