Installation guide

OMCI based GPON zNID
44 FTTH Application Guide
Overview of the configuration process
In this chapter we will talk about how to provision ONTs (or zNIDs) that
require OMCI for configuring data, voice and video services. You can learn
the latest supported OMCI based GPON zNID models by using the Smart
OMCI web tool. How to use this tool will be described in this chapter.
In this chapter we will use ZNID-GPON-2510 as an example, and configure
the triple play services one at a time.
The following flowchart covers the overall procedure to provisioning OMCI
based zNID.
Figure 6: Overview of the OMCI based GPON zNID configuration process
For the detail configuration procedure of each step shown in the Figure 6, see
below:
— The step of Configure support for the zNID is described in Create Supports
for zNID on page 48.
— The rest of steps in the overall flowchart are described in following
application sections:
Create High Speed Internet on GPON OMCI with Uplink and Downlink on
page 55
Create Video Bridge on GPON OMCI with Uplink and Downlink on page 61
Create VoIP on GPON OMCI with TLS bridges on page 63
Here are brief descriptiond of each step:
• Configure the supports for zNID (or ONT)
In this step, we will create an ME profile file and an ME profile for the
selected ONT model, and create a Generic profile for desired service
plans.