Installation guide

Turning Up Your Solution(s)
40 FTTH Application Guide
a Connect a Category 5 or a Category 6 cable to an RJ45 interface as
shown in Figure 5.
For the FTTH Application Guide scenario we will connect the local
port to LAN 2 for managing. The data port for the computer will be
LAN port 1.
For the PC we will be using to emulate a set top box we will connect
to LAN port 3.
Note: For wire management, it is recommended that the wire
wraps around the wire management hooks from left to right.
Figure 5: Connect Ethernet port
b Note which LAN port you have connected.
zn0707