User`s guide

6. Monitoring and Troubleshooting
7990-A2-GB20-00 May 2002
6-9
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
1. Delete another
login/password combination.
2. Reenter the new login ID.
No Security Records to
Delete
Delete was selected from the
Administer Login screen, and
no security records had been
defined.
No action is needed.
Enter a security record.
Password Matching
Error – Re-enter
Password
Password entered in the
Reenter Password field of the
Administer Logins screen
does not match what was
entered in the Password
field.
Try again.
Please Wait Command takes longer than
5 seconds.
Wait until the message clears.
Test Active A test is running and no
higher priority health and
status messages exist.
Contact the service provider if
test initiated by the network.
Wait until the other test ends
and the message clears.
Cancel all tests from the Test
screen.
Stop the test from the same
screen from which the test
was started.
Table 6-4. Entry Response Messages (2 of 2)
Device Message What Message Indicates What To Do