User`s guide

2. Using the Asynchronous Terminal Interface
7990-A2-GB20-00 May 2002
2-5
Screen Work Areas
There are two user work areas:
Screen area
– This is the area above the dotted line that provides the menu
path, menus, and input fields.
The menu path appears as the first line on the screen. In this manual, the
menu path is presented as a menu selection sequence:
Main Menu
→
Configuration
→
Current Configuration
→
DSL Port
Function key and message area
– This is the area below the dotted line that
lists function keys specific to the screen, field value choices, and system
messages.
main/config/dsl_interface
Model: 799x
DSL INTERFACE OPTIONS
PSD Mask: Symmetrical
Estimated Line Length: Long
Startup Margin: 0dB
Max DSL Rate: 2056 Kbps
Min DSL Rate: 2056
Kbps
EIA-530 Payload Rate: 2048
Kbps
Remotely Initiated Loopback Enable
Peer IP Address: 135.090.025.001 Clear
Circuit Identifier: Clear
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
Select: Symmetrical, Asymmetrical LOS at Net, Pt 1
Input
Fields
Function
Keys
Menu
Path
Field Value
Choices
System
Messages