User`s guide

Index
IN-2
May 2002 7990-A2-GB20-00
connectors
COM Port, C-2
G.703 Network Interface, C-5
location on unit, 1-5
power input, C-2
rear panel, C-1
Control branch
Administer Logins, 5-3
Change Identity, 3-5
Download Code, 3-16
Reset AutoRate, 3-16
Reset Device, 3-14
create login ID, 5-3
current DSL performance, 6-16
customer configuration, 3-7
switchpacks, internal switches, 4-2
D
data
channel loopback (DCLB), 7-9, A-11
port loopbacks, DTE initiated, A-11
terminal loopback (DTLB), 7-8, A-11
DC power option, 3-2
Default
configuration area, 3-7
Network Destination, A-24
delete Login ID, 5-4
device
messages, 6-8
reset, 3-14
dimensions, D-1
Disconnect Time
for Telnet session, A-20, A-22
display LED status, 6-18
documents, related, vi
DOS, TFTP server on, 3-11
Download
Code, 3-16
Failed status message, 6-3
DSL
Error Statistics screen, 6-10
interface options, A-2
LED, 6-19
Line Loopback, 7-3
line rate, 3-15
Mode, A-14
Network Interface Cable, C-6
Performance Statistics screen, 6-12, 6-16
tests, 7-2
Trap Threshold, A-6
DSL Line Rate
effect on AutoRate, A-3
switch setting
Model 7995, 4-4
Model 7996, 4-6
DSLAM defined, 1-2
DTE
connecting, 3-3
G.703 loopback, 7-5
initiated loopbacks, A-11
LED, 6-19
E
effective access level, 5-2
EIA-530 Payload Rate, A-4
EIA-530-A-to-V.35 Cable Interface, C-11
ending an ATI session, 2-8
Enterprise
SNMP traps, B-5
Specific Traps, enabling, A-32
entry response messages, 6-8
environment requirements, D-1
error
messages, line 24, 6-8
statistics, 6-10
Estimated Line Length, A-3
F
factory defaults, 3-7
resetting, 5-5
failure
CPU, 6-6
DataPath, 6-6
Device, 6-6
G.730, 6-6
internal, 6-6
Memory, 6-6
feature numbers, cables, D-1
features of unit, 1-2
firmware
download from server, 3-16
select with switch
Model 7995, 4-4
Model 7996, 4-6
Framing, G.703 interface, A-12
Front Panel LEDs, 1-4