User`s guide

B. Standards Compliance for SNMP Traps
B-8
May 2002 7990-A2-GB20-00
EIA-530-A ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
ifType (RFC 2863)
ifTestType (RFC 2863)
The following objects
control tests in
SNMP-managed devices:
– noTest(0) – Stops the
test in progress.
– testLoopDCLB(3) –
Initiates a Data
Channel Loopback.
– testLoopDTLB(3) –
Initiates a DTE
Loopback.
– testLoopRLB(5) –
Initiates a Remote
Loopback.
– testSendDCLBUp(9) –
Initiates a Data
Channel Loopback Up
message.
– testSendDCLBDown(10)
– Initiates a Data
Channel Loopback
Down message.
enterpriseTestStart – Any
one of the following tests is
active on the interface:
– Data Channel Loopback
– DTE Loopback
– Repeater Loopback
enterpriseTestStop – No
tests currently running on the
interface.
Table B-6. Tests Affecting enterpriseTestStart/Stop Traps (2 of 2)
Interface
enterpriseTestStart/Stop
variable bindings Possible Cause