User`s guide

B. Standards Compliance for SNMP Traps
B-2
May 2002 7990-A2-GB20-00
warmStart
authenticationFailure
Table B-2. warmStart Trap
SNMP Trap Description Possible Cause
warmStart The unit has reinitialized
itself.
The trap is sent after the unit
resets and stabilizes.
There are no variable
bindings.
Reset command.
Power disruption.
Table B-3. authenticationFailure Trap
SNMP Trap Description Possible Cause
authenticationFailure Failed attempts to access the
unit.
Variable bindings:
devAuthentication
FailureIPAddress
(Health & Status MIB)
Returns zero if the IP
address is unknown or the
failure came from the
terminal port.
Three unsuccessful attempts
were made to enter a correct
login/password combination.